used wheels for FIAT at Apple Motors

The wheels on this page all bolt onto 4 X 98 MM patterns. For FIAT, Lancia and Yugo.

Various used alloy Campagnolo, Cromodoras for FIAT and Lancia

Keizer Magnesium Centers. Fit your old Keizers to some magnesium centers.
Imagine your wheel centers powder coated the same color as your car... New Keizer Aluminum wheels

Special purchase a good set of 14" Cromodora Iron Cross wheels
$600 call Doug

wheel 1

Note:
All used wheels can come in irregular quantities. If you have a broken set, and need to buy or sell only one wheel, let me know.
Two used Cromodora Turbo wheels. The first is in good shape, the second one is damaged near the center cap. See close up. No bolts, no caps, just two wheels.
Call for prices.


	Used "Ironcross" 5X13 wheel 13 pounds uses stock lug bolts $400 per set


Do you need lug bolts for your wire wheels? We have a solution ! used Cromodora made for Lancia. They work well on Spiders. $400 per set 14X5.5" ;	Used Bertone Cromodoras CD91 (centers discontinued). 5.5X13 " weight 13 lbs.

A libre wheel libre with 4 of the inserts installed.
Also note the loose inserts on the white card.

Below are the wheels with 4 X 98 bolt pattern that have no taper on the surface that the lug bolt contacts. This reduces the fastner's mechanically advantage.
More importantly, there is aluminum-on-steel contact area with these wheels and their fastening system. This is unsafe; sometimes the wheels fall off. This kind of wheel needs special attention and repeated checksto insure the bolts are torqued properly to 65 foot/pounds after each time the wheel is removed.
We can convert wheels; like the one to the left, with a steel insert that will allow the use of standard FIAT style lug bolts. Add $150 for the conversion, and safely keep lugs tightened

Torque any FIAT 12X1.25 pitch lug nut or bolt to 65 foot pounds.

These inserts fit well to a 12MM lug bolt and give plenty of area to bolt to.
The wheel needs to be machined to fit the new steel inserts. No more need to carry spare lug bolts and nuts for when you have a flat tire.

All of the wheels pictured below could use this modification.
The inserts are $6.25 apiece or $96 for a set of 16.

used Anson ? wheel for FIAT Spider, Coupe, or Lancia Scorpion.
They work well on Spiders. $400 per set 13X5.5"
They will require studs and nuts. 14 pounds each.
Anson Chapparal pattern 4 nice Iron Cross, with decent TA's.

call for prices/ or to arrange a trade. 1-303-421-0571

To return to Apple Motors home page www.AppleMotors.com or Call 303-421-0571 for more info
E mail to : dave@applemotors.com